User guide

3 › Minimum System Requirements

Operating Systems

Windows

The Fast Track Pro is supported under Windows XP, with Service Pack 2 or later only. It is

not

supported under Windows 2000, Windows

98, 98SE or Windows ME. Visit the Windows update web pages to make certain you have the most current updates and ﬁxes supplied

by Microsoft.

Mac

The Fast Track Pro is supported under Mac OS X version 10.3.9, 10.4.2 or later. Earlier versions of Mac operating systems are not

supported.

Hardware

Windows

< Pentium 3 – 500 MHz (higher speed CPU may be necessary for laptops)

< 256MB RAM

< DirectX 9.0c or higher

< Windows XP (SP2)

 (Windows 2000, 98, 98SE, ME & NT not supported)

Mac

< Macintosh G3** 600 / G4** 667MHz (higher speed may be necessary for laptops)

< 256MB RAM

< OS X 10.3.9 or later (earlier versions of Mac operating systems are not supported)

* M-Audio suggests that you also check the minimum system requirements for your software, as they may greater than the

above.

** G3/G4 accelerator cards not supported; native FireWire ports required.

4 › Controls and Connectors

Front Panel

1. Signal Indicator LEDs (Signal) – The Signal LED will illuminate green when an input signal of –24dBFS is detected.

2. Clip Indicator LEDs (Clip) – The Clip LED will illuminate red when the input signal reaches 1dBFS below the clipping point. If the red

Clip LED lights often or stays lit for any period of time, lower the input gain level on that channel.

3. Input Gain Level Knob (GAIN) – Controls the input level of the associated Mic/Inst input (6). The variable gain range is >40dB.