Specifications

46
D Transport, sequencer and other global functions
Transport buttons: The corresponding transport functions in Reason.
Click button: Loop On/Off
Solo Button: Click On/Off
Read/Off Button: Reset Automation Override
Marker button: Go to left locator
Nudge button: Go to right locator
Left/Right Arrow buttons: Go to previous/next bar
Up/Down Arrow button: Target previous/next track (moves master keyboard
input up or down in the track list).
Jog Wheel: Moves the song position, or the position of the left or right locator.
Drop Button: Jog wheel controls left locator position.
Replace Button: Jog wheel controls right locator position.
Cycle Button: Jog wheel controls song position (default).
Zoom Button: Jog wheel moves position in coarse steps (default).
Scrub Button: Jog wheel moves position in fine steps.
Cancel Button: Mute on/off for the current target track (the track with master
keyboard input)
Save Button: Mute off for all tracks (lights up when any track is muted)
Enter Button: Solo on/off for the current target track
Undo Button: Solo off for all tracks (lights up when any track is soloed)
Trim Button: Undo
Group Button: Redo
Fader 1-8: A1-A8 Groove amount
Rotary 1-8: A1-A8 Slide (in Slide Mode (press the Track button))
Rotary 1-8: A1-A8 Shuffle (in Shuffle Mode (press the Send button))
D For devices with patches, buttons F15 and F16 selects the previous
or next patch.
D Mixer 14:2
The Channel Left/Right buttons determine which channels should be con-
trolled (1-8 or 9-14). You select what the rotary encoders should control by
pressing the following Assignment buttons:
Track button: Aux Send 1
Send button: Aux Send 2
Pan/Surround button: Pan
Plug-in Button: Aux Returns
EQ Button: Treble
Instrument Button: Bass
Alternatively you can press the Select button for a channel - the rotaries will
then control all sends, EQ and pan for the selected channel only. The assign-
ment display shows the number of the selected channel. To return to normal
mixer mode, press the Select button again.
D Line Mixer 6:2
If you press the “Track” Assignment button, the rotaries control the sends. If
you press the Pan/Surround button they control pans.
D Thor
There are two variations: Filters and Osc & Mod - you select variation by
pressing Assignment buttons “Track” and “Send”.
D Subtractor
There are two variations, "Filter" and "Amp & Osc" - you select variation by
pressing Assignment buttons “Track” and “Send”.
D Redrum
Use the Channel Left/Right buttons to select which drum channels should be
controlled (1-8 or 9-10).
You can audition the drum sounds with the Select buttons.
The rotaries can control a number of different settings for the drum sounds -
you select which setting by pressing the following Assignment buttons:
Track button: Pitch
Send button: Length
Pan button: Pan
Plug-ins Button: Send 1
EQ Button: Tone/Sample Start/Pitch Bend Amount
Dyn Button: Velocity Sensitivity
Buttons F1-F8 select pattern and buttons F9-F12 select bank.
D Malström
There are three variations, "Osc/Mod A", "Osc/Mod B" and "Filter" - select by
pressing the Assignment buttons Track, Send or Pan/Surround, respectively.
D BV-512 Vocoder
The faders control the band levels - use the Channel Left/Right buttons to
select which vocoder bands to control.
D Matrix
Buttons F1-F8 select pattern and buttons F9-F12 select bank. The Select
button for channel 1 controls the Pattern Enable switch.