Specifications

38
D BV-512 Vocoder
Five variations are used: Ctrls and Band 1-8/9-16/17-24/25-32. In the first
variation the knobs control the main parameters. In the other variations the
knobs control the levels of the vocoder bands.
D Matrix
Two variations are used. In the first variation knob1-8 select Pattern1-8. In the
second variation knobs 1-4 select Bank A-D.
Oxygen 49/61
Requirements/Setting up:
1. Connect the Oxygen 49/61 via USB or MIDI.
2. Select preset 1 and make sure this isn't changed from the factory
settings. For Oxygen 8 v2 select preset 10 instead.
About the default mapping:
D The transport buttons control the corresponding transport func-
tions in Reason.
D Keyboard shortcut variations are used for devices with many pa-
rameters.
D Buttons 8 and 9 selects previous and next keyboard shortcut varia-
tion.
D Buttons 6 and 7 selects previous and next sequencer track.
D Buttons 4 and 5 selects previous and next patch in devices that use
patches.
D The parameter mapping is identical between the 49 and 61 models.
D Note that Fader 9 controls master level on many devices.
D Mixer 14:2
There are six keyboard shortcut variations, for controlling channels 1-7 or 8-
14, respectively. The faders control channel levels in all variations, the knobs
control pan/Aux1/Aux2 and the buttons control mute and solo.
Fader 9 always controls the master level and Knob 8 controls the Aux 1 or
Aux 2 Return levels depending on selected variation.
D Line Mixer 6:2
The sliders control the channel levels while the knobs control pan or aux
sends, depending on the selected variation.
The buttons are mapped to mute and solo.
Fader 9 always controls the master level. Knob 7controls Aux Return level
and knob 8 controls Aux Pre/Post in the second variation.
D Subtractor
There are two variations, Filters & LFO and Oscillators. The faders control
Amp Env, Filter Env and Master Level in all variations. The buttons and knobs
control parameters in the respective parameter groups for each of the varia-
tions.
D Thor
There are five variations: Osc 1&2, Filter 1, LFO & Mod, Amp and Delay &
Chorus. The faders control the Rotaries, Osc 1/Osc 2 Balance, Filter 3 Drive,
Freq and Res, Delay and Chorus Dry/Wet and Master Level in all variations.
Buttons 1 and 2 control Button 1 & 2 in all variations. The remaining buttons
and knobs control parameters in the respective parameter groups for each of
the variations.
D Malström
There are two variations: Oscillators and Filters. The faders, buttons and
knobs control parameters in the respective parameter groups for each of the
variations.
D Redrum
There are two variations. The faders control channel 1-8 levels and Master
Level in both variations. Button 1 is mapped to the Run button and button 2 is
mapped to Pattern Enable in both variations. The knobs control the channel
1-8 pans or pitches depending on selected variation.
D Effect devices - general
Only the knobs are assigned to parameters in effects devices. Several key-
board shortcut variations are used in effects with many parameters.
D MClass Equalizer
There are two variations: Built-in 1 (Low and Para 1) and Built-in 2 (Para 2
and Hi). The knobs control parameters in the respective parameter groups for
each of the variations.
D Scream 4 Distortion
There are two keyboard shortcut variations: Damage & Cut and Body. The
knobs control parameters in the respective group for each of the variations.
D BV-512 Vocoder
Five variations are used. In the first variation the knobs control the main pa-
rameters. In the other variations the knobs control the levels of the selected
vocoder bands.
D Matrix Pattern Sequencer
Two variations are used: Pattern and Bank. In the Pattern variation knobs 1-8
select Patterns 1-8. In the Bank variation knobs 1-4 select bank A-D.