Specifications

28
Control Freak Studio Edition
Requirements/Setting up:
• To use the Control Freak SE with Reason, you need to select pro-
gram 36 and make sure this isn't changed from the factory default
settings.
• You can reset the Control Freak SE to factory defaults - note that
this restores all factory presets and removes any changes you have
made. To reset, turn the unit on while pressing all four buttons in
the lower row ("Shift", "Store", "<-" and "->"). The display will say
"Updating Memory".
About the default mapping:
D For devices with patches, buttons 15 and 16 are used for Select Pre-
vious/Next Patch.
D When controlling devices with many parameters, keyboard shortcut
variations are used.
D The Reason device mapping is identical to Control Freak Live
Spin Doctor
Requirements/Setting up:
• To use the Spin Doctor with Reason, you must select program 0 and
make sure this isn't changed from the factory default settings.
To select program 0, turn the Data Entry knob until the display says "Pr 0".
• You can reset Spin Doctor to factory defaults - note that this re-
stores all factory presets and removes any changes you have made.
To reset, turn the unit on while holding down the EDIT button and
the F.KEY button.
About the default mapping:
D The default mapping uses keyboard shortcut variations for devices
with many parameters.
D The Reason device mapping is similar to Control Freak Live except
that the Spin Doctor lacks buttons.