Specifications

25
Frontier Design
AlphaTrack
For detailed descriptions about using the AlphaTrack with Reason version 4,
please check out:
http://frontierdesign.com/download/pdf/AlphaTrack/
Reason_v4_and_AlphaTrack.pdf
and
http://frontierdesign.com/download/pdf/AlphaTrack/Reason_v4_Layout.pdf
TranzPort
Requirements/Setting up:
• To use the TranzPort with Reason, you need to make sure the con-
trol surface is set to Native mode. Please see the TranzPort docu-
mentation for details.
• Reason will automatically find the TranzPort if you click the Auto-
detect button on the Control Surfaces and Keyboards page in the
Preferences. If you add the TranzPort manually, you need to specify
both MIDI Input and Output ports.
About the default mapping:
There is no default mapping for individual Reason devices. Instead, by default the
TranzPort is used for controlling transport and sequencer functions.
However, you can use Remote Overrides to map TranzPort controls to the desired
device parameters if needed.
• The display shows the name of the target sequencer track in the
current song (the track with master keyboard input). The lower part
of the display shows a peak level meter (for outputs 1-2 on the au-
dio hardware interface) along with the current song position.
• The Data Wheel moves the song position, in steps of one quarter
note (or one 1/16th note, when Shift is pressed).
• The main transport buttons at the front of the device control the
corresponding functions on Reason's transport panel (Play, Stop,
etc.).
The remaining controls have the following default mappings:
|
TranzPort Control
|
Reason Function CC
Next/Previous Track buttons Target next/previous track (move master key-
board input down/up in the track list)
Shift + Next/Previous Track Select next/previous patch for target track's
device
Track Record button ("Rec") No default mapping
Track Mute button Unmute all tracks
Track Solo button Solo on/off for target track
Shift + Track Solo button Turn Solo off for all tracks
Undo button Undo
Shift + Undo button Redo
In/Out buttons Go to left/right locator
Punch button Reset Automation Override
Shift + Punch button Click on/off
Loop Button Loop on/off
Shift + Previous Marker button Decrease tempo 1 BPM
Shift + Next Marker button Increase tempo 1 BPM
Add Marker button Overdub/Replace mode
Shift + Add Marker button Quantize Notes During Recording on/off
Foot Switch No default mapping