Specifications

20
About the default mapping:
D The following controls have global functions in Reason:
Cursor Up: Target Previous Track
Cursor Down: Target Next Track
Cursor Left: Move song position to previous bar
Cursor Right: Move song position to next bar
Prev Button: Goto Left Locator
Next Button: Goto Right Locator
Shift+Prev Button: Click On/Off
Shift+Next Button: Overdub/Replace
Undo Button: Undo
Shift+Undo Button: Redo
Time Dial: Song position
Return to Zero: Loop On/Off
Rewind: Rewind
Fast Forward: Fast Forward
Stop: Stop
Play: Play
Record: Record
D For patch devices, the Mixer button selects the previous patch and
the Inst button selects the next patch.
D For effect devices, Status button 8 in dark (unlit) mode controls the
Bypass/On/Off state.
D Mixer 14:2
The Track Group button to the left selects which mixer channels to control
(channel 1-8 or channel 9-14). This selection affects faders, Status Buttons
and Control knobs. The modes for the Status Buttons are mute (dark), solo
(green) and EQ on/off (red).
D Mixer 6:2
Fader 1-6 control level. Control 1-6 (Pan) control pan. Control 1-6 (Send 1)
control Aux Send and Control 8 (Send 1) controls Aux Return. Status Buttons
1-6 (Dark) control Mute and Status Button 1-6 (Green) control Solo.
D Thor
There are five keyboard shortcut variations: Filters, Osc & Amp, Modulation,
Sequencer 1 and Sequencer 2. Depending on selected variation, the faders,
status buttons and controls control the corresponding sections of Thor. Con-
trol 1 and 2 (Pan) control Rotary 1 and 2 and Status Buttons 1 and 2 (Dark)
control Buttons 1 and 2 on the Thor panel in all but the Sequencer 1 & 2 vari-
ations.
D Redrum
The Track Group button to the left selects which drum channels to control
(drum 1-8 or drum 9-10). The modes for the Status buttons are mute (dark),
solo (green), decay/gate mode (red) and audition drum sounds (orange). To
select pattern, press Shift and use the horizontal cursor buttons. To select
bank, press Shift and use the vertical cursor buttons.
D BV-512 Vocoder
The faders control band levels and the Track Group button to the left selects
which vocoder bands to control.
D Matrix
The Status buttons select pattern in dark mode and bank in green mode. But-
ton 8 in green mode controls the Pattern Enable switch. You can also select
patterns using Shift+Horizontal Cursor buttons and select banks using
Shift+Vertical Cursor buttons.
D ReGroove
The faders control the A1-A8 Groove amount.
Control 1-8 (Pan) control A1-A8 Slide.
Control 1-8 (Send 1) control A1-A8 Shuffle.