Specifications

19
! Due to the settings in preset 0, buttons B1 and B2 cannot be used
as two separate buttons. Instead they appear as a single control
surface item called "Dec/Inc Buttons". You can map this item to a
parameter in Reason.
About the default mapping:
D Buttons B5 and B6 are used for "Target Previous Track" and "Target
Next Track" (moving the master keyboard input up or down in the
track list).
D For patch devices, buttons B3 and B4 are used for selecting the pre-
vious and next patch, respectively.
D The three buttons to the left (above the pitch bend lever) are used
for transport control: L1 = Stop, L2 = Play and L3 = Record.
Note again that both USB MIDI input ports must be selected for this to work.
D When controlling devices with many parameters, keyboard shortcut
variations are used.
PCR-M30/M50/M80 series
Use the "Edirol PCR-M series" control surface model if you have an Edirol
PCR-M30, PCR-M50 or PCR-M80. Setup procedures, controls and default
mappings are the same as for the Edirol PCR series.
UR-80
Requirements/Setting up:
• To use the UR-80 with Reason, you need to make sure that the "Pre-
set" memory set is selected (press the Memory button and then the
first Track/Status button, marked "Preset").
• If you connect the UR-80 via USB or two-way MIDI, Reason will au-
tomatically find it If you click the Auto-detect button on the Control
Surfaces and Keyboards page in the Preferences. If you connect the
UR-80 via USB and select a MIDI input port manually for the UR-80,
you should select the port called "UR-80 2".
About the controls:
There are 24 Control knobs available, divided in three groups of eight. You select
which group of Control knobs to use ("Pan", "Send 1" or "Send 2") by pressing
the Assign button to the right of the knobs.
Similarly, there are 32 Status buttons, divided in four groups of eight. You select
which group of Status buttons to use by pressing the Select button to the right of
the buttons. The color of the Select button indicates which group is currently se-
lected.
Most of the controls in the right part of the panel are available for use with Rea-
son. All of these controls (except for the Time dial) have double functions - press
Shift to use the secondary functions.
! Note: As of this writing, Reason does not control the LEDs for the
Status buttons, Play button and Rec button. We plan to add support
for this soon - please check www.propellerheads.se for more info.