Specifications

indicate or not indicate if pre-emphasis has been applied to the outgoing digital

audio signal. The default is “None” and rarely will any user want to set the value to

“CCITT” or “50/15uSec” unless the transmitted audio has been encoded with one

of those types of pre-emphasis.

About Page

The “About” page, while displaying the handsome M Audio logo and applicable

version. If you have Internet browsing capabilities and are currently connected to

the Internet, clicking on the Midiman copyright will link you to the M Audio /

Midiman web site (PC only).

Save, Delete, Load Buttons; H/W Installed

On the PC, at the rightmost side of the Delta Control Panel are the Save, Load and

Delete buttons as well as an “installed hardware” set of radio buttons. T h e s e

controls appear regardless of what Delta Control Panel page is being displayed.

SAVE, DELETE, LOAD: The Delta Control Panel always retains the last settings

entered. However the Save, Delete, and Load functions expand this capability to

store different sets of control panel settings using different configuration file names.

These configurations are then available for recall at a later date and time.

Clicking the ‘Save’ button brings up a dialog box prompting you to name the

current configuration. Once you have done this, click ‘OK’, and your current

configuration has been saved to disk. If you decide that you no longer need a

particular configuration, click the ‘Delete’ button. Highlight the name of the

configuration file that you wish to delete, and click the ‘OK’ button. To recall or

reload a saved configuration, click the ‘Load’ button. Highlight the name of the

configuration file that you wish to recall, and click ‘OK’. Those settings will now

appear in the Delta Control Panel and the driver will automatically update the

hardware.

H/W INSTALLED: Up to three Delta cards may be installed in a PC system at one

time (Note: On the Drivers CD, see the “Multi-card Installation” readme file). This

section displays all installed Delta cards, and allows you to select which particular

card is under the control of the control panel software. To select a card for

configuration, click the radio button to the left of that particular card in the

“H/W Installed” list.

ON THE MAC: To save your Delta control Panel settings, go to the File menu and

select “Save,”or “Save as.” A dialog box will appear, promting you to name the

current configuration. Once you have done so, click the Save button. To save the

current settings as your default, go to the File menu and choose “Save as

Preferences.”