Use and Care Manual
Installation instructions
1. Find your spot. Locate beam, playground, or healthy horizontal tree branch
(branch should be a minimum 8” in diameter). WARNING: Avoid any strap
edges or abrasive contact with strap to maximize life and funcon of strap.
Area surrounding hanging site should be clear of obstacles and over at,
so terrain.
2. Wrap tree strap around a healthy sturdy branch or other object and pass
Cyclone Spinner end through the other loop end. The excess strap should
hang from the underside of the branch. (See: Figure A)
3. To adjust the height of the strap connue to wrap the strap around the tree
branch and through the loop mulple mes unl desired length is achieved
(See: Figure B) or create loop with the center of the strap and pull both
ends through (See: Figure C).
4. Pull strap ghtly to secure against branch.
5. Aach your swing securely to Stainless Steel Swivel Spinner using oponal
carabiner or by aaching swing hanging hardware directly to the lower
poron of spinner
IMPORTANT
• Check your Stainless Steel Spin Kit
frequently for signs of wear. If any part
of the kit is worn down, do not use.
• Tree strap safely supports maximum
weight of 800 lbs.
M&M Sales Enterprises, Inc.
Dubuque, IA 52002 | 877-242-0154
www.mandmsalesinc.com
A
B C