Instructions / Assembly

Installation instructions
1. Find your spot. Locate beam, playground, or healthy horizontal tree
branch (branch should be a minimum 8” in diameter). WARNING: Avoid
any strap edges or abrasive contact with strap to maximize life and
funcon of strap. Area surrounding hanging site should be clear of
obstacles and over at, so terrain.
2. Wrap tree strap around healthy sturdy branch or other object and pass
Stainless Steel Swing Spinner end through the other loop end. The excess
strap should hang from the underside of the branch. (A)
3. To adjust the height of the strap connue to wrap the strap around the
tree branch and through the loop mulple mes unl desired length is
achieved (B) or create loop with the center of the strap and pull both ends
through (C).Pull strap ghtly to secure against branch.
4. Aach your swing securely to Stainless Steel Swing Spinner using oponal
carabiner or by aaching swing hanging hardware directly to the lower
poron of spinner.
IMPORTANT
Check your Stainless Steel Swing Spinner
frequently for signs of wear. If any part of
the kit is worn down, do not use.
Tree strap safely supports maximum
weight of 800 lbs.
M&M Sales Enterprises, Inc.
Dubuque, IA 52002 | 877-242-0154
www.mandmsalesinc.com
A
B C