Use and Care Manual

ManualsBrandsM and M Sales Enterprises ManualsPlayground EquipmentCyclone Spin Kit Plus Accessory For Swings

MM00187

10 ft. Tree Strap

• Easily adjustable 10 ft. tree strap anchors to

any identifiably safe tree, beam or play

structure

• Hang any swing safely while protecting your

tree – wide strap minimizes damage to

trees and is safer, stronger, and easier to

use than rope

• Tree strap made of 1-7/8” non-stretch

polyester 5-panel 100% polyester webbing

– resistant to abrasion, water, and contains

UV inhibitors that prevent sunlight decay

• Loop ends are securely doubled over for

more durable connection points with swing

hardware

• Box-X pattern sewn into strap to ensure

uniform stitch length and strength

• *Constructed ONLY for static loading / Not

suitable for dynamic or shock loading

• **NOT designed for twisting / Twisting of

tree strap can cause excessive wear/fraying

and can lead to tearing

2200

LBS.

LIMB SAVER SLEEVE

SPIN KIT

CYCLONE SWING

Spinner

• Safety rated to 2200 lbs.

• Allows for 360-degree

rotaon in a clockwise or

counterclockwise direcon

• Quick, sturdy and durable

assembly to any single point

hanging swing

• Rounded edges create a safe

aachment to any carabiner,

spring clip, tree strap, rope,

or chain

• Quality aluminum construcon

with stainless steel bearings

• Spins eortlessly in a clockwise

or counterclockwise direcon

Limb Saver Sleeve

• 3 . 100% non-stretch polyester webbing that is resistant to abrasion and water

• Weather-resistant and UV-resistant to prevent sunlight decay

• 2 in. dual-sided construcon allows for a non-slip posion once set

• Reduces abrasion and damage to trees commonly caused by rope, strap or cord

Summary of content (2 pages)

PAGE 1
MM00187 TM SPIN KIT LIMB SAVER SLEEVE CYCLONE SWING 10 ft. Tree Strap Spinner • Easily adjustable 10 ft. tree strap anchors to any identifiably safe tree, beam or play • Safety rated to 2200 lbs.
PAGE 2
Installation instructions 1. Find your spot. Locate beam, playground, or healthy horizontal tree branch (branch should be a minimum 8” in diameter). WARNING: Avoid any strap edges or abrasive contact with strap to maximize life and function of strap. Area surrounding hanging site should be clear of obstacles and over flat, soft terrain. 2. Wrap tree strap with limb saver sleeve around a healthy sturdy branch or other object. Make sure the limb saver sleeve is positioned to make direct contact with the limb.