Use and Care Manual

MM00181
LIMB SAVER
SLEEVE
(1) 3 . Limb Saver Sleeve
Limb Saver SLEEVE
• 3 ft. 100% non-stretch polyester webbing
that is resistant to abrasion and water
• Weather-resistant and UV-resistant to
prevent sunlight decay
• 2 in. dual-sided construction allows for a
non-slip position once set
• Reduces abrasion and damage to trees
commonly caused by rope, strap or cord
• *Constructed ONLY for static loading / Not
suitable for dynamic or shock loading
• **NOT designed for twisting / Twisting of
tree strap can cause excessive wear/fraying
and can lead to tearing
INSTALLATION
• To install, feed tree strap,
rope or cord through
sleeve and pull to
straighten.
• Wrap tree strap, rope or
cord with limb saver sleeve
around an idenably
safe tree, beam or play
structure. Make sure
the limb saver sleeve is
posioned to make direct
contact with the limb or
object surface.
OTHER
PERFECT
ACCESSO-
RIES FOR
LIMB SAVER
SLEEVE
#MM00185
10 . Tree
Strap
Cyclone Swing
Spinner
Stainless Steel
Swing Spinner
CarabinerFind online at
mandmsalesinc.com
#MM00188
#MM00146
#MM00148
SAFER. BETTER. STRONGER.