SDS
Tough Job Remover - 7 oz.
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
09/06/2017
EN (English US)
3/7
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:
Take up liquid spill into absorbent material. Notify authorities if product enters sewers or public
waters.
Other information
:
Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take
precautionary measures against static discharge. Flammable vapors may accumulate in the
container. Use explosion-proof equipment. Wear personal protective equipment. Use only
outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapors/spray. Avoid
contact with skin and eyes.
Hygiene measures
:
Do not eat, drink or smoke when using this product. Always wash hands after handling the
product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures
:
Ground/bond container and receiving equipment.
Storage conditions
:
Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
acetone (67-64-1)
ACGIH
Local name
Acetone
ACGIH
ACGIH TWA (ppm)
500 ppm (Acetone; USA; Time-weighted average
exposure limit 8 h; TLV - Adopted Value)
ACGIH
ACGIH STEL (ppm)
750 ppm (Acetone; USA; Short time value; TLV -
Adopted Value)
ACGIH
Remark (ACGIH)
eye irr; CNS impair; BEI
OSHA
OSHA PEL (TWA) (mg/m³)
2400 mg/m³
OSHA
OSHA PEL (TWA) (ppm)
1000 ppm
8.2. Appropriate engineering controls
Appropriate engineering controls
:
Ensure good ventilation of the work station.
Environmental exposure controls
:
Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection:
Protective gloves
Eye protection:
Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
In case of insufficient ventilation, wear suitable
respiratory equipment
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:
Liquid