W OO D LIGHTIN G CE HANDMA IN DE S 1994 O D LI G O H T - - W I-Club TO UCHED BY SET UP USA & CANADA I SSL LED UL
I-CLUB SLIM suspension by Burkhard Dämmer Integrated LED Shade dimensions LED Linear Module 5 x 7,7 W 3,9” 120-277V - 60Hz 30W 0.45-0.19A 0.97-0,92 3,9” 60,2” Contains Packing case - Shade. - Canopy. 8” - Bag with two screws, two wall plugs, two ceiling cones, level, allen key & drill template. 71” 12” 16” 9” Weight Gross 15,4 Lb Net 7,1 Lb 2 9” No.
I SSL LED UL 1. Use the template to find the optimum position for your lamps and market the ceiling. 2. 3. 4. Then drill the suspension cones to the ceiling. Use the template to find the optimum position for your lamps. Note: remember to mount your lamp with the seams facing away from the main entrance. Now you will have 4 cones on the ceiling situated near the junction box.
I-CLUB SLIM suspension by Burkhard Dämmer 5. Suspend the lamp from the cones by passing the stainless steel cable through the cones and cable traps. 6. Fix the cover with the led modules to the fixtures. Don’t touch the led modules. Use allen key No. 2 a. b. 4 Use allen key No.
I SSL LED UL 7. Now that your lamp is hanging it’s time to put up the ceiling canopy and connect it to the lamp. Please remove from the box. 8. Important. Turn off the main power before installing. ON OFF Connection 9. The canopy is made up of a back plate with the main electrics attached to it and the front cover.
I-CLUB SLIM suspension by Burkhard Dämmer 10. Feed the electrical wires in through the electrical back plate, fix back plate to the junction box and prepare to wire up the driver. 11. CONNECTION OPTIONS OPTION 1: NON DIMMABLE 1a. You should have a 3 wire cable coming from the mains. The Line (black), ground (green/yellow) and neutral (white) must be connected to cables (Line - brown, Ground - green/yellow and neutral - blue).
I SSL LED UL 1b. Now take the two cables coming from the lamp (Line and neutral) and feed them through the canopy cover and make the connections to the driver in the canopy. 1c. In the canopy connect the electrical cable from the lamp to the terminal block indicated.
I-CLUB SLIM suspension by Burkhard Dämmer OPTION 2: DIMMING 2a. You should have a 3 wire cable coming from the mains. The Line (black), ground (green/yellow) and neutral (white) must be connected to cables (Line - brown, Ground - green/yellow and neutral - blue) Line / Black Line / Brown Neutral / White Neutral / Blue D- D+ V- V+ PE / GNYE / Green-Yellow Lamp cables MEAN WELL Mains cable 2b.
I SSL LED UL 2c. Now take the two cable (line and neutral) from the lamp, feed it through the canopy cover and connect it to the canopy. 2d. In the canopy connect the electrical cable from the lamp to the terminal block indicated.
I-CLUB SLIM suspension by Burkhard Dämmer 12. 13. Once all your wiring is complete raise the canopy and screw on the canopy support nut that holds the cover in place.
I SSL LED UL 14. Leveling the lamp with the level supplied, adjusting on the suspenders. 15. Lamp leveling Steel cable h min 8” h max 8 ft 90º 16. Turn on the mains again. ON OFF WOOD VENEER: Due to the natural nature of the material sometimes one may note slight undulations in the wood veneer. This is a natural reaction to humidity or different climatic conditions and should go away with use. PROTECTIVE FILMS: Don’t forget to remove all protective films from the acrylic surfaces of your lamp.
GENERAL CARE INSTRUCTIONS Use and care of your lamp. You have just purchased an original handmade product by LZF. Your lamp is made out FSC® certified natural wood with our patented veneer finish Timberlite®. This treatment both protects and safeguards the wood veneer against breakages. Depending on the type of lamp use a feather duster, soft cleaning cloth or damp cloth for cleaning. On our more delicate shades, like those made from wood strips, a feather duster or an air blower is preferable.
