SETUP M O N TA J E BLACK NOTE DUPLET BKNT DU A LED
CONTENTS CONTENIDO 1 un. 1 Shade Pantalla 1 2 3 2 Screws & wall plugs Tornillos y tacos 2 un. 3 Level Nivel 1 un. 3 Allen key No. 2 Llave allen nº 2 1 un. 4 No.
ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE Use the Allen key. Use la llave allen. 1 Remove these screws to separate the shade from the back plate. Quite los tornillos para separar la pantalla de la tapa trasera. C C Use allen key Nº 2 Usar llave allen Nº2 Feed the electrical wires (A) through the structure (B). Use the level supplied to mount your lamp horizontally, fix it to the junction wall with the screws and connect the electrical wires to the main.
ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE 4 MAINS CABLE MAINS CONNECTION OPTIONS OPCIONES DE CONEXIÓN A RED N Turn off the mains before installing the lamp. Connect the lamp to the mains as follows.
ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE Take the connector from the Driver (C) and connect it to the shade connector (D) 5 Ahora tome el conector rápido del driver (C) y conéctelo al de la pantalla (D). D C C C Return the shade to its position. Put the holding screws back into place. 6 Colocar la pantalla en su posición una vez realizada la conexión y fijar los tornillos. C C Use allen key Nº 2 Usar llave allen Nº 2 7 E Turn on the mains again. Conectar la tensión eléctrica.
GENERAL CARE INSTRUCTIONS INSTRUCCIONES DE CUIDADO Use and care of your lamp. You have just purchased an original handmade product by LZF. Your lamp is made out FSC® certified natural wood veneer treated with our patented finish, Timberlite®. This treatment both protects and safeguards the wood veneer against breakages. Depending on the type of lamp use a feather duster, soft cleaning cloth or damp cloth for cleaning.
