Installation Instructions

Page 2
1
Remove window molding or
other projections so window
frame is ush with wall.
2
If the window extends above
the tile / wall surround or is
higher than 36" then only three
panels are required and top
section of trim will stay in place.
Top
window
trim
stays in
place
3
Scrape inside window frame
to remove loose paint or caulk.
Window frame and wall must
be smooth and free of any soap
residue, wax or oil.
4
Measure height and depth of
window frame.
5
Mark measurements from step
4 on two panels.
6
Use a utility knife and straight
edge to cut marked locations.
Trial t both side panels.
(Leave panels in place.)
7
With side panels still in place
measure width of window
frame that will include side
panels.
Trial t side panel
Trial t side panel
9
Mark measurements from step
7 and 8 on remaining panels.
8
Measure depth of top and
bottom window frame.
Installation Instructions