Installation Instructions

ManualsBrandsLyons ManualsBathVersatile 60" x 32" White Bathtub Wall Surround

DO NOT RETURN PRODUCT!

FOR QUESTIONS OR CONCERNS

please call or e-mail our customer support team

8:00am-4:30pm EST. Monday - Friday

1-800-458-9036

lyonssupport@lyonsindustries.com

Subject to manufacturing tolerance of [+] or [-] 1/8"

Kit Includes:

1 - Back Smooth Panel

1 - Back Caddy

2 - Side Panels

NOTE: All smooth panels are 31⁄" x 59" and back caddy is 29¾" x 59"

Versatile™

(VSxx603259)

SUPPLIES YOU WILL NEED:

6 Tubes of adhesive compatible with polystyrene

1 Tube of color coordinating or clear caulk

Caulk (for faucet installation)

Masking Tape

Material for creating cross bracing (see step 14)

TOOLS YOU WILL NEED:

Tape Measure

Pencil or Marker

Utility Knife

Caulk Gun

Notched Trowel

Safety Glasses

IMPORTANT

• Read installation instructions carefully BEFORE starting project.

• Leave protective lm on during installation.

• Allow panels to reach room temperature before installation.

• Save carton for template.

• Not designed for unheated properties. Freezing temperatures could cause cracking.

• Keep instructions for warranty information.

Summary of content (4 pages)

PAGE 1
DO NOT RETURN PRODUCT! FOR QUESTIONS OR CONCERNS please call or e-mail our customer support team 8:00am-4:30pm EST. Monday - Friday 1-800-458-9036 lyonssupport@lyonsindustries.
PAGE 2
Installation Instructions 1 3 2 Drywall sets above bathtub flange Bathtub Flange Remove faucet handles, trim, faucet spout and shower door/ curtain 4 Wall surfaces must be SOLID, SMOOTH, CLEAN, DRY and PLUMB. Remove soap residue, loose plaster, paint or wall paper. Wall kit may be installed over existing tile. 6 Place template over faucet controls. "X" side goes against wall. Template should be flush with front edge of bathtub and back wall. If not, cut template to fit. Mark faucet locations.
PAGE 3
12 11 ve cti e t Pro Film 13 e tiv c e t Pro Film ve cti e t Pro Film Side panels are designed to be flush with front edge of bathtub, back panel and caddy. Peel back protective film from all panel edges and caddy edges to allow room for caulking. Place back flat panel in desired corner and press firmly in place. Place caddy in opposite corner. Caddy may overlap flat panel. Repeat this procedure for both side panels. Be careful not to get glue on finished edges.
PAGE 4
LYONS CLASSIC BATHING FIXTURE — LIMITED WARRANTY 5-YEAR CONSUMER, 2-YEAR COMMERCIAL Lyons Industries, Inc. warrants to the original purchaser that this Lyons Classic bathing fixture will be free of manufacturing defects, which affect its performance as a bathing or showering fixture, under the following conditions and subject to the limitations contained in the ”Remedies” and ”Warranty Limitations” sections.