Installation Instructions

Page 3
Caulk all seams with a high
grade color coordinated or clear
caulk. Allow caulk to fully cure
per manufacturer's instructions.
Remove all protective lm.
16
Protective
Film
Protective Film
Protective Film
15
Allow adhesive to fully cure per
manufacturer's instructions.
Cross bracing may be required.
11
Evenly trowel adhesive. Failure
to trowel adhesive will result in
an uneven nish.
12
Place back panel and press rmly
in place. Be careful not to get glue
on nished edges.
Repeat steps 10-12 for side panels.
Make sure wash cloth bar is in
position.
Side panels are designed to be
ush with back panel and front
edge of bathtub.
Protective
Film
Protective
Film
14
Apply poly styrene compatible
adhesive below marked line on
back wall in an "S" pattern.
10