Installation Instructions

ManualsBrandsLyons ManualsBathMonaco Premium 60" x 36" White Shower Wall Surround

Subject to manufacturing tolerance of [+] or [-] 1/8"

Monaco Premium™

(MPSxx603672)

Kit Includes:

2 - Back Panels

2 - Corner Caddy Panels

2 - Side Panels

NOTE: Two back panels are 24⁄" x 72"

and two side panels are 31" x 72"

Monaco Premium™ Tile

(MPTxx603672)

SUPPLIES YOU WILL NEED:

6 Tubes of adhesive compatible with polystyrene

1 Tube of color coordinating or clear caulk

Caulk (for faucet installation)

Masking Tape

Material for creating cross bracing (see step 17)

TOOLS YOU WILL NEED:

Tape Measure

Pencil or Marker

Utility Knife

Caulk Gun

Notched Trowel

Safety Glasses

DO NOT RETURN PRODUCT!

FOR QUESTIONS OR CONCERNS

please call or e-mail our customer support team

8:00am-4:30pm EST. Monday - Friday

1-800-458-9036

lyonssupport@lyonsindustries.com

Side Panels are

NOT interchangeable

Side Panels

are interchangeable

NOTE: Two back panels are 26" x 72"

and two side panels are 31" x 72"

IMPORTANT

• Read installation instructions carefully BEFORE starting project.

• Leave protective lm on during installation.

• Allow panels to reach room temperature before installation.

• Save carton for template.

• Not designed for unheated properties. Freezing temperatures could cause cracking.

• Keep instructions for warranty information.

Summary of content (4 pages)

PAGE 1
DO NOT RETURN PRODUCT! FOR QUESTIONS OR CONCERNS please call or e-mail our customer support team 8:00am-4:30pm EST. Monday - Friday 1-800-458-9036 lyonssupport@lyonsindustries.
PAGE 2
Installation Instructions 1 3 2 Drywall sets above shower base flange Shower Base Flange Remove faucet handles, trim, faucet spout and shower door/ curtain. 6 EP AN SID 7 Template Use Carton as Template EL 5 Place one side panel on packing carton to create a template. Cut carton to same size as side panel. Mark one side of template with an "X" and always place "X" side toward wall. Replace damaged or standard drywall with waterproof drywall.
PAGE 3
10 11 12 ve cti e t Pro Film Remove panel and apply adhesive below marked line on back wall using an "S" pattern. Repeat for side panels. Evenly trowel adhesive. Failure to trowel adhesive will result in an uneven finish. Follow adhesive manufacturer’s instructions. Repeat for side panels. 14 13 e tiv ec ot ilm r P F e tiv c e t Pro Film Peel back protective film from all panel edges and caddy edges to allow room for caulking.
PAGE 4
CLEANING Do not use any abrasive cleaners or metal scrapers. If drywall mud or plaster gets on finished surface, it may be carefully removed with a wooden scraper made from a piece of scrap wood. Any excess adhesive should be cleaned up immediately using mineral spirits or WD-40®. DO NOT USE LACQUER THINNER, it will damage surface of wall. Ideal cleaners are 409®, Soft Scrub Gel®, or Comet Gel®. WARNING: Some cleaning products are not suitable for use. Read all labels carefully.