Installation Instructions
Page 5
5. Attach rollers to top ange on both glass panels.
NOTE: The outside panel has an oset lip on one side of the bottom frame. This lip is on the outside face of
the panel and rollers should be mounted on the same side at the lip. The inside panel has holes drilled on the
one side of the bottom frame. Rollers should be mounted on the same side as the holes on the bottom. The
slots in the top ange are used to ne tune the adjustment of the panel to make up for walls that are slightly
out of square or plumb. For best results, start with all rollers centered in the slot and then make adjustments as
needed.
Roller Screw
10
15
6
6. Attach towel bar using towel bar wrench to outside panel.
Roller Screw
10
15
6
5
6
Side View