Installation Instructions

Page 4
3. Place wall jamb on side wall. Make sure
that bottom track is still in place. Secure wall
bumper on center hole of wall jamb using
1½" screw. Insert 1½" screws into remaining
top and bottom holes. Repeat on opposite
side of wall.
11
8
1½” Screw









3
4b. Place top track on top of both door jambs.
1
2
3
1
Length = actual opening minus ⁄"
1
1
Side View
4a 4b
4a. Measure opening at top of wall jambs. Take this
measurement and subtract ⁄". Using a handsaw, cut the
top track using this measurement.