Installation Instructions

Page 3
Parts List
Top Track (1pc) Bottom Track (1pc) Wall Jamb (2pcs)
Door Panel (2pcs)
(Inside / Outside)
Towel Bar (1pc)
Towel Bar Bracket (2pcs)
Knob (1pc) Wall Bumper (2pcs) Panel Guide (1pc)
Roller (4pcs)
1-1/2” Screw (6pcs)
Wall Plug (6pcs) 3/8” Screw (2pcs) 5/16” Screw (1pc)
Towel Bar Wrench
(2-3/8” Long 2pcs)
12
3
45
109876
11
12 13
14
15
1. Measure opening of bathtub/shower base. Take this
measurement and subtract 1½". Using a handsaw, cut the
bottom track using this measurement.
1
2
3
2
Length = actual opening minus 1½"
1
3
2
2
2. Place bottom track along opening of bathtub/shower base.
Place wall jambs on both sides of the wall. Mark each hole
location. Remove wall jambs and drill into each hole location.
If installing wall on tile, place wall plugs into each hole using a
rubber mallet.