Installation Instructions

ManualsBrandsLyons ManualsBath54"W x 68"H Silver Framed Sliding Shower Door with Obscured Glass

Page 1

SUPPLIES YOU WILL NEED:

1/8” Drill Bit

1/4” Masonry Drill Bit (For Tile Install Only)

Silicone Caulk

TOOLS YOU WILL NEED:

Power Drill

Level

Pencil

Tape Measure

Hand Saw

Screw Driver

Rubber Mallet

Safety Glasses

Caulk Gun

DO NOT RETURN PRODUCT!

FOR QUESTIONS OR CONCERNS

please call or e-mail our customer support team

8:00am-4:30pm EST. Monday - Friday

1-800-458-9036

lyonssupport@lyonsindustries.com

WARNING: Safety glasses should always be worn when installing tempered glass.

IMPORTANT

• Read installation instructions carefully before starting project.

• Familiarize yourself with all parts as shown on the next page.

• The exploded view will provide a helpful reference related to the location of the parts

and how they are mounted.

• Keep instructions for warranty information.

By-Pass Glass Door

Bathtub Door Part# DBPS5468-OB-SV

Shower Base Door Part# DBPT5458-OB-SV

Summary of content (8 pages)

PAGE 1
DO NOT RETURN PRODUCT! FOR QUESTIONS OR CONCERNS please call or e-mail our customer support team 8:00am-4:30pm EST. Monday - Friday 1-800-458-9036 lyonssupport@lyonsindustries.com TOOLS YOU WILL NEED: SUPPLIES YOU WILL NEED: Power Drill Level Pencil Tape Measure Hand Saw 1/8” Drill Bit 1/4” Masonry Drill Bit (For Tile Install Only) Silicone Caulk Screw Driver Rubber Mallet Safety Glasses Caulk Gun WARNING: Safety glasses should always be worn when installing tempered glass.
PAGE 2
By-Pass Glass Door 3 1 10 12 11 14 12 3 7 8 11 10 12 11 11 6 5 12 4 13 9 11 3/8” Screw 8 13 12 4 5/16” Screw 11 2 12 1-1/2” Screw Page 2
PAGE 3
Parts List 1 3 2 Top Track (1pc) 6 Bottom Track (1pc) 7 12 11 1-1/2” Screw (6pcs) Wall Jamb (2pcs) 8 Knob (1pc) Towel Bar Bracket (2pcs) 4 Wall Plug (6pcs) 5 Door Panel (2pcs) (Inside / Outside) 9 10 Wall Bumper (2pcs) Panel Guide (1pc) 13 14 3/8” Screw (2pcs) 1 2 Towel Bar (1pc) Roller (4pcs) 15 5/16” Screw (1pc) Towel Bar Wrench (2-3/8” Long 2pcs) 3 2 1 2 3 Len gth = act ua lo pe nin g mi nu s1 1/2" 1. Measure opening of bathtub/shower base.
PAGE 4
3 11 11 1½” Screw 8 11 11 3. Place wall jamb on side wall. Make sure that bottom track is still in place. Secure wall bumper on center hole of wall jamb using 11/2" screw. Insert 11/2" screws into remaining top and bottom holes. Repeat on opposite side of wall. 11 11 8 11 8 11 4a 1 4b 1 1 2 3 Len gth = act ua l op en ing 1 Side View mi nu s 1/1 6" 4a. Measure opening at top of wall jambs. Take this measurement and subtract 1/16".
PAGE 5
Side View Roller Screw 10 Roller Screw 10 5. Attach rollers to top flange on both glass panels. NOTE: The outside panel has an offset lip on one side of the bottom frame. This lip is on the outside face of the panel and rollers should be mounted on the same side at the lip. The inside panel has holes drilled on the one side of the bottom frame. Rollers should be mounted on the same side as the holes on the bottom.
PAGE 6
7 8 1 1 1 Side View 1 Side View Side View Side View 1 1 Outer Door Inner Door 4 4 7. Install outer door panel by lifting up and into top track as shown. 8. Install inner door panel by lifting up and into top track as shown. 9 10 14 5⁄16” Screw 13 3⁄8” Screw Outer Door 7 Inner Door 4 4 9 Adjust 14 Inner Door 4 13 9. Attach knob to the end of the inside panel that is opposite of shower head. 10.
PAGE 7
11 11. Caulk the inside and outside sides of the shower door frame to seal. Keep the entire area dry for 24 hours. Have a question regarding installation? Please contact Lyons Customer Support at: 1-800-458-9036 M-F 8:00am - 4:30pm EST lyonsind@lyonsindustries.
PAGE 8
LYONS SHOWER DOOR — LIMITED WARRANTY 5-YEAR CONSUMER, 2-YEAR COMMERCIAL Lyons Industries, Inc. warrants to the original purchaser that this Lyons shower door will be free of manufacturing defects, which affect its performance as a bathing or showering fixture, under the following conditions and subject to the limitations contained in the ”Remedies” and ”Warranty Limitations” sections.