Installation Instructions

33½"
Drain C
L
Floor Cut Out (6" x 10")
60"
10"
6"
8-3/4"
15-11/16"
* Optimum GFCI receptacle locations. Actual locations may vary
depending on your stud layout.
*GFCI Electrical
Outlet
Junction Box
59-7/8”
31-7/8”
56”
20”
19”
16”
Contour™ Heated Soaking Bathtub (CHSTUxx603219)
Contour™ Whirlpool (CWUxx603219)
= stud location
RH drain shown—reverse layout for LH drain.
6032 STUD LAYOUT. Most standard bathtub walls will t Lyons
Contour™ bathtub
Subject to manufacturing tolerance of [+] or [-] 1/8"
TOOLS YOU WILL NEED:
Level
Square
Saber saw
Tape measure
Pencil
Power Drill
Safety glasses
Caulk Gun
SUPPLIES YOU WILL NEED:
1-5/8" Stainless Steel Screws
Wood Shims
Construction Adhesive
Mortar compound (optional)
GFCI receptacles - See above for quantity needed
Drain & overow assembly with extension
100% Silicone for Drain
Page 1
IMPORTANT
• Read installation instructions carefully before starting project
• Peel back protective lm to verify color before installation
• Allow bathtub to reach room temperature before installation
• Do not use plumber’s putty Will cause product failure and void warranty Use a high grade silicone
caulk for all necessary locations
• Do not use sulfuric acid to unclog drain. Will cause product failure and void warranty.Use plunger or
snake to clear obstruction
• Building materials and wiring should be routed away from the pump body and any other heat
producing components
• Bathtub must be tested for leaks before nal installation Although your unit has been factory tested,
damage may occur during shipping or handling (See Page 2 Step 3)
• Keep instructions for warranty information
NOTE: Heated soaking bathtub has a combined pump
and heater, requiring only one GFCI receptacle. One GFCI
receptacle is required for whirlpool without in-line heater.
A second GFCI receptacle is required if whirlpool has an
in-line heater.
COMPLIANCE CERTIFICATIONS:
ANSI Z124.1 AND CAN/CSAB45
CAN/ULC S102.2 FLAME75
SMOKE DEVELOPED485 CODE
ASME:A112.19.7 AND CAN/CSAB45.10
DO NOT RETURN PRODUCT OR CONTACT STORE!
FOR QUESTIONS OR CONCERNS
1-800-458-9036 [e-mail]