Installation Instructions

Subject to manufacturing tolerance of [+] or [-] 1/8"
Page 1
IMPORTANT
• Read installation instructions carefully
before starting project
• Peel back protective lm to verify color before installation
• Allow bathtub to reach room temperature before installation
• Do not use plumber’s putty. Will cause product failure and void warranty.
Use a high grade silicone caulk for all necessary locations.
• Do not use sulfuric acid to unclog drain. Will cause product failure and void
warranty. Use plunger or snake to clear obstruction.
• Keep instructions for warranty information
TOOLS YOU WILL NEED:
Level
Square
Jig Saw
Tape Measure
Pencil
Power Drill
Safety Glasses
SUPPLIES YOU WILL NEED:
1-5/8" Stainless Steel Screws
Wood Shims
Construction Adhesive
Mortar Compound (Optional)
Drain & Overow Assembly with
Extension
100% Silicone for Drain
COMPLIANCE CERTIFICATIONS:
ANSI Z124.1 AND CAN/CSAB45
CAN/ULC S102.2 FLAME75
SMOKE DEVELOPED485 CODE
DO NOT RETURN PRODUCT OR CONTACT STORE!
FOR QUESTIONS OR CONCERNS
1-800-458-9036 [e-mail]
Linear™ Bathtub (LLTUxx603219)
Standard Floor Rough-in
31-7/8”
59-7/8”
53”
1”
19”
20”
25”
21”
42”
= stud location
33½"
15⁄"
60"
11"
6"
8¾"
Drain C
L
Floor Cut Out (6" x 11")
6032 STUD LAYOUT. Most standard bathtub walls will t Lyons
Linear™ bathtub
LH drain shown—reverse layout for RH drain.