Assembly Manual

LynxmotionV-Tail
VTail400/500FRAMEASSEMBLYGUIDE
VTail400/500
ThankyouforpurchasingaVTailmultirotorkit.Thisguidewillhelpyouassemblethe
mechanicalframe.Shouldanypartsbemissingorbroken,pleasecontactusviathe
RobotShopSupportCenter.ImagesshownarefortheVTail400thoughVTail500parts
aredesignedthesameway.SpecialthankstoInnerbreedFX.
G10PARTS
➢ 6xVTailArmSupport
➢ 1xVTailTailBrace
➢ 2xVTailTailBraceSupport
➢ 1xVTailBottomBodyPlate
➢ 1xVTailMiddleBodyPlate
➢ 1xVTailTopBodyPlate
➢ 2xVTailBottomFrontArm
➢ 2xVTailTopFrontArm
➢ 6xVTailLanding
➢ 2xVTailRearArm
➢ 2xVTailBottomTailMotorMount
➢ 2xVTailTopTailMotorMount
➢ 2xVTailRear“V”Support
HARDWARE
➢ 31x0.5"standoffs
➢ 4x0.25"standoffs(Tosecureyourflightcontroller)
➢ 6x1.5”standoffs(FortheTopBodyPlate)
➢ 8x3/16"440hexscrews(Forthe0.25”standoffs)
➢ 62x1/4"440hexscrews
➢ 14x3/8"440hexscrews
➢ 6x0.5”440setscrews(TomounttheTopBodyPlate)
➢ 14x440nylonlocknuts
Note:hardwaretype/quantitymaychangeslightlydependingonavailability.