User Manual

SEQUENCER
Decision Frame
At the end of every sequence there is a permanent frame called the decision frame (it is orange for
easy identification):
Click on the top part (orange) to change the last action of the sequence. There are 3 options:
• STOP: once the sequence is completed, nothing else will happen
• LOOP: once the sequence is completed, it will repeat a set amount of time
• GOTO: once the sequence is completed, it will trigger the input selected
If another sequence is associated with that input, it will then play
Playback Control
You can change the speed of playback by changing the speed multiplier. Click the up and down
arrows to alter this.
Normally a sequence plays to the end then stops. However, sometimes you want a sequence to
repeat. You can toggle this by clicking the Loop button.
- 28 -