User Manual

CHAPTER 2
Sequences
The sequencer allows you to make your robot move over time by transitioning from one position to
another. Each transition we call a frame and a sequence of frames we call a sequence.
You can create as many sequences as you like. You can play sequences back manually or using the
inputs mentioned in the Control Panel section, Input LEDs sub-section.
This section describes the sequence management functions of the Sequencer.
Sequence List
The sequence list is the first control on the sequencer. If you click on the arrow on the right-hand edge
you'll see a list of the sequences that have been created and by selecting one you can move to that
sequence. You can also scroll through the list one-by-one using the up and down arrow buttons.
Clicking on the name of a sequence will allow you to change this. Simply type in the box then press the
Return key or click away.
Sequence Management
Add Sequence
To add a sequence click the add button. A new sequence will appear in the list and its name will open
for editing.
- 21 -