Electronic Guide

LynxmotionUAV
ElectronicConfiguration
B) Install Flight Controller
EnsurealloftheR/CcablesfromalloftheESCsprotrudefromthecenterplateandcaneasily
beaccessed.Youcannowinstalltheflightcontrollertotheframeusingthescrewsprovided.
TheUSBconnectoronthecontroller(FLIP/MultiWii)facestheFRONTofthecopter(thismay
notbethecaseforallflightcontrollers).
ExplodedviewoftheMultiWiiFliptypicalassembly
C) Orientation check
ConnecttheMultiWiitothecomputerandopentheGUI(asexplainedintheLynxmotionMultiWii
QuickStartGuide).HoldtheUAVinyourhandandmoveitaroundandlookatthe3Dmodelto
confirmit’smovingcorrectly.Recalibratetheaccelerometer/gyroagainonceithasbeen
installedontheframe(asdescribedintheMultiWiiQuickStartGuide).
D) ESCs -> Flight Controller
TheESCscannowbeconnectedtotheflightcontroller.SincethepinoutontheFLIPflight
controllerisnowhiddenontheundersideoftheboard,aviewfromthetopisprovidedbelow.