assembly instructions

SEDONA by LYNX™ READY TO FINISH ISLAND ASSEMBLY INSTRUCTIONS
6 SEDONA by LYNX™ Ready to Finish Island Assembly Instrucons
Step 1
Unpacking the Box
Remove the staples and binding straps from the outside of the box. From inside the box, remove the foam and
packing materials. Separate the island components from the box by Grill Island and Counter Island.
Counter Island: 2 end panels, 1 back panel, 1 base panel, and 1 counter top panel (see component list on pg.4)
Grill Island: 1 end panels, 1 back panel, 1 base panel, and 1 counter top panel (see component list on pg.4)
We recommend 2 to 3 people perform setup operaons.
Step 2
Posion and Level the Base
Place the island base on a level surface in its nal locaon and proceed to verify the
island base is level it in all direcons. The boom panel has adjustable feet for this
purpose. DO NOT OMIT THIS STEP. If the base is not leveled correctly the island
will be misaligned. The base cannot be leveled and the island cannot be moved
once the assembly complete. If you need to reposion the island you will have to
disassemble the island and reassemble.
Island Base
Remember to situate the base panels in relaon to the orientaon you have chosen for the island.
(Level is not included)
Leveling Foot