Use Care & Installation Guide

LCS30 COCKTAIL STATION CARE & USE/INSTALLATION
|
9
INSTALLING THE LCS30 PASS SHELF (OPTIONAL)
DETAIL F
SCALE 1 : 5
F
FREESTANDING ASSEMBLY
1. Remove the rear panel of the cart, and the two brackets (shown in detail F) holding in the rear ller plate.
2. With the panel removed, pull o the stainless steel rear ller.
3. Unscrew the large nut holding the faucet in place, and remove the faucet.
4. Set the pass shelf on top of the sink, carefully matching the opening of the sink with the opening of the pass
shelf base.
5. Once all hoses have been fed through the holes assemble the faucet per the original instrucons (included).
6. Connect the molex connector from the light harness to the wiring harness from the sink.
7. Re-aach the rear panel.
Transformer
Connection
Sink Wire Harness
LCS30 Pass Shelf
Light Connection