Use Care & Installation Guide

|
LCS30 COCKTAIL STATION CARE & USE/INSTALLATION6
INSTALLING THE LCS30 FRONT COMPONENTS
1. Located the supplied hardware bag with 3 stainless shoulder screws and 2 stainless philips head screws.
2. Install the two stainless steel shoulder screws into the right hand side inserts of the front panel.
3. Carefully lower the bole holder on the newly aached shoulder screws.
4. When installing the bole opener you will need to Install the third shoulder screw directly below the far le
insert. Aach the top of the bole holder when you install the towel bar, as they share the screw.
5. Connue to install the towel bar using the second stainless steel phillips head screw provided.
Stainless
Steel
Screws
Stainless Steel Shoulder Screws