User Manual

Sonoma Smoker By Lynx™ Care & Use P/N 35948 Page 5
STEP #4—SETUP Wi-Fi CONNECTIVITY
 On your Phone or Tablet, verify that you have at least 60% wireless signal at your Sonoma Smoker. If
you cannot achieve at least 60% signal, we suggest you use a Wi-Fi extender, or booster. These are
available at your local electronics store.
 On your Sonoma Smoker, press the power buon and wait about 5 seconds for the smoker to display the Lynx Logo and
mer buons.
 Push the green or yellow Wi-Fi icon in the upper le of the control panel.
 Push the “conrm wireless reset” buon
 On your phone or tablet, switch to your Wi-Fi sengs and locate the wireless network called Smoker xxxx (xxxx is the last
four digits of your serial number) and connect to it.
QUICK START POWER CONNECTIVITY & WI-FI SET UP PROCESS*