LMSKM)

CARE & USE/INSTALLATION

GETTING STARTED

MEET YOUR SONOMA SMOKER BY LYNX™

Congratulations on your purchase of a Sonoma Smoker by

Lynx™! The pages that follow will help you get the most out

of your Sonoma Smoker by Lynx™. Before that though, it’s

important to understand that the Sonoma Smoker by Lynx™

has several basic requirements.

THINGS TO KNOW ABOUT THE SONOMA SMOKER

1. The Sonoma Smoker requires gas and electricity to

operate.

2. The Sonoma Smoker is powered by a control panel.

When turning the smoker on, there will be a wait time

of less than 60 seconds while the smoker boots up. Any

time the smoker is loading or booting, the Lynx logo

will be on the screen letting you know the smoker is

busy.

3. If using the app the Sonoma Smoker requires a Wi-Fi

internet connection.

PLUGGING IN YOUR SONOMA SMOKER BY LYNX™

Your Sonoma Smoker by Lynx™ comes with a power supply

designed to ﬁt into a 120 volt AC 15 amp GFI (Ground

Fault Interrupter) electrical outlet.

This power cord must be plugged in prior to any attempt

to utilize the Sonoma Smoker by Lynx™.

Your Sonoma Smoker by Lynx™ is activated by pressing

the round POWER ON/OFF switch located on the left hand

side of the smoker.

CONNECTING YOUR SONOMA SMOKER BY LYNX™ TO

YOUR WIRELESS NETWORK

Before you can connect your Sonoma Smoker by Lynx™ to

your wireless network, you must ﬁrst download the Sonoma

Smoker by Lynx™ app to a compatible iOS or Android

Device.

Be sure your Sonoma Smoker by Lynx™ is plugged in and

turned on before attempting to connect it to your wireless

network.

In order to connect your Sonoma Smoker by Lynx™ to your

wireless network follow the instructions on the following

page.

Ensure you connect the Wi-Fi antenna.

Power Supply Connection (behind rear panel)