Manual


LynxModelNo.LHFS Page18 P/N33348Rev.A7/2010
Installation Instructions
Position / Move the Heater
1. Ensure Wheels are properly connected to the Base Body. (Refer to Installation Step 2.)

2. Move the Heater by handling ONLY the Pole or the Base Body. It may take two people to
manoeuvre the Heater safely depending on the size / strength of the person(s).

3. Tip the Heater backwards at an angle to / overtop of the wheels until Base no longer touches the
ground. Wheel / roll Heater to new location and return Base to ground. Ensure Heater is on level
ground and stable in new location.

4. If the Heater is going to be operated at the new location the “Secure the Heater
” procedure
must be completed.