Specification Sheet

FOR MORE INFORMATION, PLEASE CALL 1.888.289.5969 OR VISIT WWW.LYNXGRILLS.COM
EXPOSED FLANGE
.500
HEATER FLUSH
w/ FINISHED CEILING
HEATER FLUSH
w/ FLANGE
1/2" CLEAR
FROM HOLES
SUB-FLOOR 5/8" DRYWALL CAP
DECORATIVE TRIM
PARTIALLY COVERING FLANGE
2 X 8 STUDS
MINIMUM
2 X 8 STUDS
MINIMUM
Step 3
Install the frame into the finished pocket. You may choose to leave all four inches of the trim
exposed, or partially cover it with a decorative ceiling (1/2” clearance is required from ventilation
holes).
Step 4
Install the heater (heater must face horizontal to the floor) and adjust the tabs to set the heater
height appropriately. The heater must be in the enclosure before installing into the ceiling.
TABS
ADJUSTABLE
3.750
SIDE VIEW
FLUSH MOUNT HEATER KITS
INSTALLATION INSTRUCTIONS