Sedona Cart Assembly

With assistance, remove all packing materials from the grill.

Also remove the grates and warming racks to lighten the

assembly. The grill will be placed onto the cart as

illustrated in this step. The back edge will engage first and

the front will slide down into position until horizontal.

Using at least two people – with gloves - grasp the front

and side of the Grill at points A and B. Place the unit on the

cart and lower it slowly until horizontal.

You may need to loosen the Screws

inside the firebox. (See Step 7)

Do not grip grill by the

control knobs as damage

may occur

Step 6.

Four screws remain in the package for assembly.

To secure the grill to the cart locate 4 screws at the inside

corners of the firebox. Remove and discard the 4 screws at

these locations. Replace them one at a time with the ¼-20 x ½

screws from the kit.

Refer to the installation manual provided with the grill for the

proper electrical and gas connections.

Step 7.

Drop the door hinge

pins into the

corresponding door

hinge on the frame.

Step 6.

Step 7.