Use and Care Manual

26
|
  CARE & USE/INSTALLATION
MANUAL LIGHTING
If a burner doesn’t light after several attempts, it can be 
match lit using the lighting rod stored in the drip tray. 
First, make sure you’ve returned all of the control knobs 
to the OFF position and have allowed 5 minutes for any 
accumulated gas to dissipate before attempting to match 
light a burner. 
Trident ™ Burner
To match-light this burner, use the lighting rod to insert a lit 
match through the cooking grate and through the 
protective screen.
Push and turn the corresponding burner control knob to 
“LITE”. If the burner doesn’t light within 5 seconds turn the 
knob off and wait 5 minutes before attempting to light it 
again.
LIGHTING YOUR GRILL ...continued 
Extremely cold temperatures may cause your Trident ™ burners to light inside the 
burners instead of outside. Once lit, if you hear a ‘whooshing’ sound, immediately 
turn the burner knobs off to extinguish the flame and then immediately re-light the 
burners.
COLD WEATHER WARNING: PROPANE










