User Manual
CARE & USE/INSTALLATION 
|
36 37
|
  CARE & USE/INSTALLATION
BURNER GOES OUT
• Location
First determine if the problem is being caused by location. 
If the grill is subject to high winds, reposition it to provide 
some protection. 
• Check the Flame
Check the gas supply and flame characteristics. (See IN-
DEX: “Flame, Correct Size”)
• Burners Seated
Check to ensure that the burners are correctly positioned 
in the grill. (See INDEX: “Burner Placement” for further 
details.) 
Correctly-installed burners should be seated firmly and 
level with no side-to-side movement. 
BURNER GOES OUT ONLY WHEN SET TO “LOW”
The valves on the grill feature an adjustable low setting. 
Fluctuations in gas pressure, gas conversion and even in 
the quality of the gas itself may affect burner performance 
at the “LOW” setting. It could be either too high or too 
low. (See INDEX: “Burner Adjustment” for further details.)
ROTISSERIE WON’T LIGHT
Follow the same procedure as described for the grill 
burners to diagnose problems with the rotisserie burner. 
BE CAREFUL! The rotisserie burner flame may be hard to 
see in bright sunny conditions.
ROTISSERIE LIGHTS BUT GOES OUT AS SOON AS 
CONTROL IS RELEASED
• Check Thermocouple
The control knob must be held in for 30 to 60 seconds after 
ignition for the rotisserie burner to stay lit. (See INDEX: 
“Lighting Rotisserie Burner” for further details.)
If the burner will not stay lit when you release the control 
knob, re-light it and hold the control knob in for at least 60 
seconds to allow the thermocouple to heat up. 
If, after holding the control knob in for at least 60 seconds, 
the burner still will not stay lit when releasing the control 
knob, call for service. 
(See INDEX: “Obtaining service from Lynx” for further 
details.) 
LIGHTS WILL NOT ILLUMINATE
• Check Power
Ensure that the grill is connected to a live AC power source 
and check for rotisserie motor operation. 
• Replace the Bulb
Replacement bulbs are halogen, 12 volt, 10W max, T3 type 
with a G4 bi-pin, and are readily available at most home 
improvement stores. The glass cover is held in place by 
two spring tension tabs. The bulbs are 
easily removable without the use of tools.  
Simply grasp the glass lens at the outer 
corners, near the front tension clips and 
push the lens back. Then, swing the lens 
down and pull it loose. You may have to loosen the screw 
to remove the lens.
Avoid touching the glass of a new bulb. Halogen bulbs are 
very sensitive to the oils found in human skin. Touching the 
bulbs may shorten their life.
Pull the bulb straight out from the socket without twisting.
Hold the bulb using a paper towel or other cloth and gently 
press it straight into the socket. The glass cover should be 
gently snapped back into place.
POTENTIAL PROBLEMS ...continued 
Pull on 
spring 
tabs to 
release 
light 
cover
CONTACTING LYNX CUSTOMER CARE
Before calling Lynx Customer Care, please make sure you 
have the following information: 
• Model number 
• Date of purchase 
• Proof of purchase by the original owner 
• Serial number
The serial number can be located on the rating plate which 
is located on the underside of the drip tray and on the heat 
shield behind the front panel.
For warranty service, contact the Lynx Customer Care 
Department for an authorized service agent near you at: 
(888) 289-5969
www.lynxgrills.com
Your satisfaction is of the utmost importance to us. If a 
problem cannot be resolved to your satisfaction, please 
write, fax or email us:
Lynx Professional Grills
7300 Flores Street
Downey, CA 90242
Service: (888) 289-5969
Tel: (562) 299-6900
Fax: (562) 299-6978
www.lynxgrills.com
email: service@lynxgrills.com
Contact Lynx for replacement parts. Parts are shipped 
F.O.B. Downey, CA.
THE LYNX STORY
Lynx began with a vision. 
A small group of manufacturing engineers with over a 
century of collective experience had a dream. They dared 
to take their extensive commercial manufacturing know-how 
and create a line of outdoor cooking products that offer 
commercial elegance and performance to the consumer 
market. 
Lynx has taken the 
quality,  workmanship, 
service and 
innovation of the 
commercial  market  and 
incorporated it into the 
Lynx Professional Grills 
line of consumer and 
commercial products. 
The combination of 
creative  design,  superior 
materials  and  exceptional 
craftsmanship elevates 
Lynx products to a class 
of their own. 
Lynx original commercial products are used every day in 
restaurants, hotels and theme parks across the USA:
LYNX SATISFIED CUSTOMERS
• TGI Fridays
• Applebee’s
• Houston’s
• Red Lobster
• Hard Rock Café
• Wolfgang Puck’s
• Cheesecake Factory
• Red Robin
• Planet Hollywood
• Hilton
• Hyatt 
• Four Seasons Marriott
 Le Meridian
• Sheraton
• Conrad International
• Bellagio
• New York New York
• MGM Grand
• Treasure Island
• Mirage
• Paris
• Venetian
• Excalibur
• Mandalay Bay
• Riviera
• Desert Inn
• Hard Rock Hotel
• Disney World










