Sedona Cart Assembly Instructions

5 Part # 33807 Rev 2016
Step 6
You will need a second person for this next step. Remove all packing
materials from the grill. Remove the cooking grates, briquee trays,
burners and warming rack to lighten the grill. You will need to place
the grill onto the cart. The back of the grill needs to be set into the cart
rst. Then the front of the grill will slide into posion aer that.
You may need to loosen 4 of the Screws inside the rebox. (See Step 7)
We recommend wearing gloves while inserng the grill into the cart.
Make sure the grill is ush with the cart horizontally. If not horizontal
re-adjust. You may need to loosen the screws a lile more.
Do not use the knobs on the grill for a
grip as it can damage them.
Step 7
Replace the screws on the inside of the rebox with 4 1/4-20 x 1/2 screws
that came with the cart.
Refer to the installaon manual provided with the grill for the proper electrical and gas connecons.
Hold the Grill at Point A and Point B
A
B
Lynx Customer Care
Ph.: 888-289-5969
Fax: [phone]
[e-mail]
Lynx Grills, Inc.
7300 Flores St.
Downey, CA 90242
www.lynxgrills.com
Ph. 562-299-6900