Sedona Cart Assembly Instructions
4 Part # 33807 Rev 2016
Step 5
Locate the cross bar and slide it into the slots on the
front of the frame. On the L400/L500 the cross bar
has magnets. On the ends of the cross bar you will see
inserts for the screws to aach the bar to the frame.
Use 2 1/4-20 x 1/2 screws to aach the cross bar to
the frame. The hinges are aached to the side panel
(if they are not visible ensure the panel is not facing
the wrong direcon).
Cross Bar and Screw Locaons
(Do not secure unl you install the door frame)
Cross Bar Notch
Door Frame Secured to Cart
Remove and
Reaach boom
screws with
Door Frame
(L600/L700)
Cross Bar Secured to Cart (L500)
Remove/Install Door from/to Frame
doors to the hinges.
On the L600/L700 you will need to mount the door
frame and cross bar at the same me. First you will
need to remove the doors from the frame. To remove
the doors you can slide them upwards o the hinge.
Then you can insert the cross bar onto the slots on the
cart frame. Then you will insert the door frame and align
the frame with the cross bar. Make sure the inserts are
lined up to install the screws. Use 4 1/4-20 x 1/2 screws
to secure the door frame and cross bar. Please note the
boom le/right screws you aached during the base
installaon need to be removed and reaached with the
frame. Once the frame is secured to the cart install the
Magnet Locaons
Cross Bar and Magnet Locaons
(L400)