Sedona Cart Assembly Instructions
3 Part # 33807 Rev 2016
On the frame there some notches where the base will slide into. Make sure the caster wheels sit above the frame of
the cart. Use 4 1/4-20 x 1/2 screws to aach the base to the frame.
Notches for Base Panel
Notches for Base Panel
Aach 4¼-20 x ½ Screws Here
Panel Edges Must Sit Over the Casters
Step 4
Now turn the cart right side up to aach the inner shelves. For
the L400 & L500 there is a Right triangle shelf with an electrical
hole. For the L600 & L700 there is a full shelf with an electrical
hole.
On the back panel and le side panel there are 2 holes where
you would aach the shelf to the panels. Make sure the shelf is
fully secured to the cart.
To secure the interior shelf use 4 1/4-20 x 1/2 screws.
Back Panel Shelf Screw Locaons
Le Side Panel Shelf Screw Locaons
L600/L700 Shelf
L400/L500 Shelf