User's Guide
Wait a few seconds and 
relite a burner. 
be properly regulated.
Ensure that you are using 
supplied by Lynx and 
supplied by Lynx and 
supplied by Lynx and 
supplied by Lynx and 
supplied by Lynx and 
supplied by Lynx and 
ensure that you do not have 
more than one regulator in 
line.
N
atural 
G
as units:
Ensure that the supply line is 
Ensure that the supply line is 
Ensure that the supply line is 
N
atural gas pressure should 
atural gas pressure should 
atural gas pressure should 
atural gas pressure should 
atural gas pressure should 
W.
C
. pressure under full load 
(with all burners on.) 
. pressure under full load 
(with all burners on.) 
. pressure under full load 
C
H
E
C
K
 F
K FK
LA
M
E
 CH
AR
A
C
TERISTI
C
S
. 
(See I
ND
EX: 
S
H
UTTER
►
►
►
►
►
►
L
OW OR 
I
NSUFF
ICI
ENT 
HEAT
D
oing so will interfere with 
oing so will interfere with 
oing so will interfere with 
heat condition.
Ensure that you’ve preheated 
the main burners for at 
Ensure that you’ve preheated 
the main burners for at 
Ensure that you’ve preheated 
the hood closed and the 
minutes. 
lation is critical. A grill that is 
lation is critical. A grill that is 
out of level will cause erratic 
lation is critical. A grill that is 
out of level will cause erratic 
lation is critical. A grill that is 
burner combustion and inef
carpenter’s spirit level should 
be used to level the grill both 
carpenter’s spirit level should 
be used to level the grill both 
carpenter’s spirit level should 
be used to level the grill both 
be used to level the grill both 
If the low heat problem 
persists:
M
E
N
TS
.
)
supply lines.  
M
ake sure that the regulator 
& hose assembly is the one 
designed for and supplied 
& hose assembly is the one 
designed for and supplied 
& hose assembly is the one 
with your Lynx grill and that 
designed for and supplied 
with your Lynx grill and that 
designed for and supplied 
►
►
►
burners indicates a lack of air.  
burners indicates a lack of air. 
But, if the air around the grill 
is dusty or if heavy grease is 
But, if the air around the grill 
is dusty or if heavy grease is 
But, if the air around the grill 
present, some orange tips on 
present, some orange tips on 
present, some orange tips on 
A
D
JUST T
H
E AIR S
H
UTTER
adjust the air shutter. 
(See 
adjust the air shutter. 
adjust the air shutter. 
adjust the air shutter. 
adjust the air shutter. 
further details.)
further details.)
►
it is correctly set up for the 
type of fuel you are using. 
it is correctly set up for the 
type of fuel you are using. 
it is correctly set up for the 
The hose and regulator 
provided by Lynx must be 
provided by Lynx must be 
provided by Lynx must be 
C
heck that there is no 
physical pressure being 
applied to the regulator 
physical pressure being 
applied to the regulator 
physical pressure being 
attached to the back of the 
applied to the regulator 
attached to the back of the 
applied to the regulator 
grill. The regulator contains 
grill. The regulator contains 
grill. The regulator contains 
should not be allowed to 
should not be allowed to 
touch the grill body or its 
surroundings. 
Ensure that the burners and 
drip tray are clean and free 
from obstructions. 
drip tray are clean and free 
from obstructions. 
drip tray are clean and free 
L
P (Propane) units: 
I
S
T
H
E
 C
YLI
ND
ER
to run the burners at high 
to run the burners at high 
heat. 
H
A
V
AVA
E
T
H
E
LI
N
E
A
QUALI
F
IE
D 
TE
CHN
I
C
IA
N 
details.)
Improper lighting proce
dures may have activated 
Improper lighting proce
dures may have activated 
Improper lighting proce
dures may have activated 
dures may have activated 
device, reducing the heat 
output. 
To reset the ow control:
Shut off all burner 
cylinder valve.
very slowly, reopen the 
cylinder valve.  
very slowly, reopen the 
cylinder valve. 
very slowly, reopen the 
►
►
►
►
Wind hitting the grill while in 
use, especially winds blowing 
into or across the hood gap 
use, especially winds blowing 
into or across the hood gap 
use, especially winds blowing 
from behind, can cause poor 
into or across the hood gap 
from behind, can cause poor 
into or across the hood gap 
performance and in some 
from behind, can cause poor 
performance and in some 
from behind, can cause poor 
cases can cause the control 
performance and in some 
cases can cause the control 
performance and in some 
panel to get dangerously hot.
Steady or 
gusty 
winds can 
prevent 
the normal 
prevent 
the normal 
prevent 
exhaust of 
hot gases. 
Locate your 
grill 
away
 from prevailing 
winds and avoid grilling in 
 from prevailing 
winds and avoid grilling in 
 from prevailing 
windy conditions.
panel to get dangerously hot.
winds can 
the normal 
exhaust of 
hot gases. 
Locate your 
away
 from prevailing 
Locate your 
 from prevailing 
Locate your 
panel to get dangerously hot.
Locate your 










