User's Guide
E
LE
C
TR
IC
IGN
I
T
I
ON
WARN
I
NG
N
ever attempt to light a burner if you smell gas.
ever attempt to light a burner if you smell gas.
ever attempt to light a burner if you smell gas.
pletely removed) when lighting your grill.
pletely removed) when lighting your grill.
Releasing fuel into a closed grill before lighting will in
pletely removed) when lighting your grill.
Releasing fuel into a closed grill before lighting will in
pletely removed) when lighting your grill.
crease the risk of explosion, property damage , personal
Releasing fuel into a closed grill before lighting will in
crease the risk of explosion, property damage , personal
Releasing fuel into a closed grill before lighting will in
injury or death.
crease the risk of explosion, property damage , personal
injury or death.
crease the risk of explosion, property damage , personal
Keep your face and body as far from the grill as possible
injury or death.
Keep your face and body as far from the grill as possible
injury or death.
Keep your face and body as far from the grill as possible
Keep your face and body as far from the grill as possible
sipate, and repeat the lighting procedure.
1)
2)
3)
4)
ever attempt to light a burner if you smell gas.
B
efore proceeding, make
sure you have completed
efore proceeding, make
sure you have completed
efore proceeding, make
sure you have completed
sure you have completed
sure you have completed
sure you have completed
sure you have completed
sure you have completed
checklist.
F
ollow these steps to light any
of the burners on your grill:
ollow these steps to light any
of the burners on your grill:
ollow these steps to light any
F
irst, make
sure all burner
control knobs
FOR
THE
MA
I
N
BRASS
BURNER
BURNER
:
knob in for
2
seconds,
allowing the igniter to heat
up. Then rotate the knob to
up. Then rotate the knob to
up. Then rotate the knob to
the knob to the desired heat
setting.
of the burners on your grill:
sure all burner
N
BURNER
or Pro
S
ear™
BURNER
:
knob in for
2
seconds,
seconds,
seconds,
WARN
I
NG
l
ighting
y
our
g
rill
BEFORE
EA
C
H
U
SE
Before any use, always make
sure that:
... you do not smell gas
before you light the grill. If
... you do not smell gas
before you light the grill. If
... you do not smell gas
you do smell gas, shut every
you do smell gas, shut every
you do smell gas, shut every
plumber check for leaks.
plumber check for leaks.
… the cooking area is free
and clear of any combustibles,
… the cooking area is free
and clear of any combustibles,
… the cooking area is free
besides your food, that might
and clear of any combustibles,
besides your food, that might
and clear of any combustibles,
ignite.
… the control knobs turn
freely.
… if you are using a
portable propane cylinder, it is
securely connected and leak
portable propane cylinder, it is
securely connected and leak
portable propane cylinder, it is
tested.
… you know where the
… you know where the
… you know where the
located
located
… the burners are seated
properly in the grill with
mounting legs in the slots.
properly in the grill with
mounting legs in the slots.
properly in the grill with
strongly or blowing on the
back of grill.
strongly or blowing on the
back of grill.
strongly or blowing on the
BRASS
BURNER
knob in for
allowing the igniter to heat
up. Then rotate the knob to
… wind is not blowing too
strongly or blowing on the
The main burners must sit level and The main burners must sit level and The main burners must sit level and
ing legs inserted into the frame slots.ing legs inserted into the frame slots.ing legs inserted into the frame slots.
ing legs inserted into the frame slots.
ing legs inserted into the frame slots.
ing legs inserted into the frame slots.
ing legs inserted into the frame slots.
ing legs inserted into the frame slots.
FOR
THE
ROT
I
SSER
I
E
BURNER
:
a thermocouple sensor with a
safety valve that automatically
a thermocouple sensor with a
safety valve that automatically
a thermocouple sensor with a
safety valve that automatically
safety valve that automatically
burner goes out.
(See I
ND
EX:
to prevent burner blow out)
To light the rotisserie burner,
push and hold the control
knob in for
push and hold the control
knob in for
push and hold the control
2
push and hold the control
2
push and hold the control
seconds and
push and hold the control
seconds and
push and hold the control
then turn the knob to the
seconds.
D
uring this time the
thermocouple will heat up and
the safety valve will remain
thermocouple will heat up and
the safety valve will remain
thermocouple will heat up and
open.
If you release the control knob
before the thermocouple has
If you release the control knob
before the thermocouple has
If you release the control knob
heated up, the safety valve
before the thermocouple has
heated up, the safety valve
before the thermocouple has
heated up, the safety valve
heated up, the safety valve
the rotisserie burner and you
BURNER
:
The rotisserie burner features
a thermocouple sensor with a