manual

26
|
CARE & USE/INSTALLATION
Extremely cold temperatures may cause your Trident ™ burners to light inside the
burners instead of outside. Once lit, if you hear a ‘whooshing’ sound, immediately turn
the burner knobs off to extinguish the flame and then immediately re-light the burners.
COLD WEATHER WARNING: PROPANE
MANUAL LIGHTING
If a burner doesn’t light after several attempts, it can be
match lit using the lighting rod stored in the drip tray.
First, make sure you’ve returned all of the control knobs
to the OFF position and have allowed 5 minutes for any
accumulated gas to dissipate before attempting to match
light a burner.
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate into the front slot of the
briquette tray for that burner.
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn the
knob off and wait 5 minutes before attempting to light it
again.
Trident ™ Burner
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate and through the
protective screen.
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn the
knob off and wait 5 minutes before attempting to light it
again.
LIGHTING YOUR GRILL ...continued