Cocktail Station Pro Care & Use

ManualsBrandsLynx ManualsOutdoor Bars30 Inch Freestanding Cocktail Station with Stainless Steel Cart, Stainless Steel Sink, Faucet, Ice Storage, Bottle Boots, Cutting Board and Towel Bar

LYNX COCKTAIL PRO

INSTALLATION AND ASSEMBLY INSTRUCTIONS

Model CS30F Shown

With Top Mounted Pass Shelf

Models: Description:

CS30-1

Counter top unit with cold water faucet and sink assembly including

water filter, ice bin, bottle well holder with inserts, speed rail, bottle

opener with catch pan, towel holder and

LED lighting on the front panel

CS30F-1

CSPS

Free-Standing model with stainless steel cart, four casters, two

stainless steel doors, storage areas, cold water faucet and sink

assembly including water filter, ice bin, bottle well holder with inserts,

speed rail, bottle opener with catch pan, towel holder, LED lighting on

the front panel and optional (CSPS) top-mounted Pass Shelf with

condiment trays and halogen lighting (2008 and older models only)

Note to Installer: Please leave these instructions with the homeowner

Note to Homeowner: Please keep these instructions for future reference.

P/N32024

Summary of content (8 pages)

PAGE 1
LYNX COCKTAIL PRO INSTALLATION AND ASSEMBLY INSTRUCTIONS Model CS30F Shown With Top Mounted Pass Shelf Models: Description: CS30-1 Counter top unit with cold water faucet and sink assembly including water filter, ice bin, bottle well holder with inserts, speed rail, bottle opener with catch pan, towel holder and LED lighting on the front panel Free-Standing model with stainless steel cart, four casters, two stainless steel doors, storage areas, cold water faucet and sink assembly including water filter,
PAGE 2
Installation Instructions CS30-1 and CS30F-1 • • • • • • • • • • • • Remove any protective wrapping Remove the speed rail, ice bin cover, bottle cap holder, faucet and water filter assemblies, water filter holder and cutting board from the inside of the ice bin Assemble the faucet assembly and place into the mounting hole at the rear of the sink and secure it in place with the lock nuts provided Position the cocktail pro CS30-1 in the island cutout (Does not apply to the CS30F) Install a PVC drain line
PAGE 3
Electrical Requirements for CS30-1 and CS30F-1 WARNING: Electrical Grounding Instructions: This outdoor appliance is equipped with a three-pronged (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong outlet. Do not cut or remove the third prong from this plug. • • • Installation must include an outdoor rated, 120 VAC, 15 amp Ground Fault Interrupter (GFI) electric outlet located adjacent to the appliance.
PAGE 4
PAGE 5
Parts List for CS30-1 and CS30F-1 Part Number 80282 80348 32246 80356 80359 80357 31663 80358 30253 30252 32614 13043 20001 13004 13035 80360 32113 80350 80354 80351 80352 80355 80353 COCKTAIL PRO CS30 Body Assembly LED Light Assembly Front Panel Speed Rail Bottle Well Assembly Bottle Cap Catcher used with L10003 Bottle Opener Towel Ring used with 31662 Towel Ring Center Hub Sliding Cover Frame Sliding Cover Top Section used with 10165 Handle Sliding Cover Bottom Section Drain Kit Faucet Cutting Board Wate
PAGE 6
Notes
PAGE 7
Notes
PAGE 8
Limited Lifetime Warranty Lynx warrants that the stainless steel housing will be free from defects in material and workmanship when subjected to normal domestic use and service for the lifetime of the original purchaser. This warranty excludes surface corrosion, scratches, and discoloration which may occur during regular use. This warranty does not apply to damage resulting from misuse, abuse, alteration, accident, hostile environments, improper installation or installation code violations.