User manual

Page 33
3.5 Tools Page
At the time of this writing of the owner’s manual, 6 of these 8 buttons are used. Tools will be added in future updates
that will add capabilities and features to Hilo. These will be available via Firmware update from the Lynx website.
3.5.1 Restore Default Routing
This button restores the factory default settings, as covered in section 3.4.8.
3.5.2 Save Scene Button
Once you have created a specific routing/level set up that you may want to recall, here is
where you would store it.
1. Once you have a set up that you want to save, push the SAVE
SCENE button
2. Select Scene 1 to 6 for storage.
3. You have now stored your routing, level, meter, sample rate,
sync source, trim, digital source, audio settings, UI options and
optical mode information.
4. If you do not want to Save a scene, push the Close button at the
bottom of the Pop up.
Tip: It is a good idea to take your favorite startup settings and store
them in Scene 1. This gives you a personal default setting from
which to work or go back to at any time.