User manual

Page 27
Outputs are labeled clearly for selection.
Unlike with input sources, all three digital outputs are
individually selectable, as are the ADAT Outputs
Please note, if the Optical Out Mode on the Home menu is set
to SPDIF, then the ADAT outputs will not be shown and
cannot be selected.
The USB Record devices correspond to the input options that will appear in OSX or Windows recording software. As
with the USB Play devices, there are default settings of Hilo inputs that stream to these record devices:
Line In: USB Record 1+2
Digital In: USB Record 3+4
Unassigned: USB Record 5+6 and 7+8
ADAT In 1-8 USB Record 9-16
One may note that USB Play devices can be routed to USB record devices. This has interesting possibilities for anyone
who wishes to record playback streams in the computer. For instance, one can be playing audio from the internet and
record it into their DAW.
3.4.8.1 Analog and Digital Level Controls for Monitor and Headphones
When the Monitor Out and Phones Outputs are selected in the Output Mix Routing Page, you will see an additional
button. For these two outputs you can control both the Digital output level and the Analog output level.