User Manual

Page 51
the Input Meters is a MONO button. Tap that button to activate it (it will turn green). On the OUTPUT METERS you
should now see your signal on the both the left and right sides. Note: The MONO button is selectable PER INPUT a nd
PER OUTPUT. While this make the feature very flexible, keep in mind you may need to select MONO for multiple
outputs (such as MONITOR OUT and PHONES).
7 Specifications
Line In L/R
THD+N -114 dB @1kHz, -1dBFS, 20kHz filter, +22dBu trim
Dynamic Range 121 dB, A-weighted, -60dBFS signal method
Frequency Response ± 0.01 dB, 20 – 20kHz
Crosstalk 140 dB maximum @ 1kHz, -1dBFS signal
Full-scale trim settings: + 0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
Female XLR connectors
Line Out L/R
THD+N -109 dB @1kHz, -1dBFS, 20kHz filter, +22dbu trim
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -135 dB maximum @ 1kHz, -1dBFS signal
Full-scale trim settings + 0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
Male XLR connectors
Monitor Out L/R
THD+N -107 dB @1kHz, -1dBFS, 20kHz filter, volume at max
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -135 dB m a x i m u m @ 1 k H z , -1dBFS signal
Output level at max volume +24dBu or +10dBu, jumper selectable
TRS connectors
Headphone Out
THD+N -107 dB @1kHz, -1dBFS, 20kHz filter, volume at max
Dynamic Range 121 dB, A- weighted, -60dBFS signal method
Frequency Response ± 0.02 dB, 20 – 20kHz
Crosstalk -130 d B m a x i m u m @ 1 k H z , -1dBFS signal
Output level at max volume +19dBu
¼” phone jack on front panel
Digital I/O
AES/EBU Transformer-coupled on XLR connectors
S/PDIF I/O coax Transformer-coupled on RCA jacks
S/PDIF I/O optical On optical connectors
ADAT I/O 8 channels at 48 kHz when selected on optical connectors
Sa mp le R ates
All standard rates up to 192 kHz using SynchcroLock sample clock generator