User Manual
Table Of Contents
- Introduction
- Getting Started
- Using Hilo
- Support
- Appendices
- Troubleshooting & User Tips
- Specifications
- Warranty Information
Page 42
3.7.6 Show/Hide Recall Scene
This also is a toggle type button which allows you to add Recall
Scene to the top right corner of the VU or Horizontal Meters
pages. When set to “Show”, you can recall Scenes directly from
the Meter pages.
3.7.7 Calibrate Touchscreen
The LCD Touchscreen has a grid that detects when you touch it to select or change settings. If you find that the touch
response gets slow or does not always engage properly, you may need to recalibrate the touch screen.
• Push the Calibrate Touchscreen button.
• The screen will go black and give you instructions for recalibrating the screen.
Simply follow the instructions and the previous screen will come up when done. Be sure
to touch directly in the center of the target to give the most accurate touchscreen
calibration.
3.8 Meter Button
This button simply sends you back to the last Meter page that you selected.